| MRC 5306CZZG Angular Contact Bearings | A:41 mm; Weight:0,82 Kg; Basic static load rating (C0):6,65 kN; Bolt (G):3/8; H1:14 mm; H2:63 mm; S:17,1 mm; Brand:KOYO; L1:45 mm; N:11 mm; |
| RHP LJT 3-1/4 Angular Contact Bearings | Brand:NTN; d:15 mm; f0:16.5; Basic static load rating (C0):0,585 kN; Max operating temperature, Tmax:120 °C; Weight:0,0025 Kg; Nlim (grease):6,600 rpm; rs min:0.2 mm; Size (mm):15x21x4; Bearing number:6702; |
| 60 mm x 110 mm x 36,5 mm FAG 3212-BD-TVH Angular Contact Bearings | B:34 mm; (Grease) Lubrication Speed:3600 r/min; C:34 mm; Bore Diameter (mm):100; Brand:FBJ; E:160 mm; d:100 mm; Outer Diameter (mm):180; Basic static load rating (C0):217 kN; Weight:3,42 Kg; Size (mm):60 mm x 110 mm x 36,5 mm ; |
| FAG 3200-BB-TVH-C3 DBL ROW ANG CONT BALL BRG Angular Contact Bearings | Basic static load rating (C0):0,48 kN; Basic dynamic load rating (C):2,51 kN; Outer Diameter (mm):19; Width (mm):6; C:6 mm; Weight:0,009 Kg; d:6 mm; D:19 mm; Bearing number:126; Bore Diameter (mm):6; |
| MRC 124RF-BKE Angular Contact Bearings | db (max):99 mm; db (min):92 mm; Enclosure:Open; Static Load Rating:430,000 N; dd (min):114 mm; r1:2.1 mm; D:170 mm; Da (max):158 mm; Fillet Radius/Chamfer:2.1 mm; ra (max):2 mm; |
| General 5310 Angular Contact Bearings | Calculation factor - Y0:0.76; Calculation factor f2B:1.02; Calculation factor - Y2:1.41; C2:7.1 mm; Fatigue load limit Pu:6.2 kN; Attainable speed for grease lubrication:6300 r/min; d1:184.7 mm; D1:215.3 mm; Da max.:229 mm; Calculation factor (single, tandem) Y2:0.87; |
| FAG 7219-B-MP-UA Angular Contact Bearings | Note:This product line wa; Dimension R:1.1 in; Bearing - Housing - Seal:MSE200BRH; Dimension D:8.0 in; Seal Type:Felt Seal; Dimension A:5.7 in; Dimension T:11.0 in; Dimension X:0.9 in; Bearing Type:Split Cylindrical Re; Tensioning Unit Type:Tension Type; |
| FAG 7412-B-MP-UA Angular Contact Bearings | ID Chamfer Length (Ci):0.031; OD Chamfer Length (Co):0.072; ID Chamfer Angle (B deg.):30; Bore Diameter (mm):95,25; Bearing Type:straight; Brand:AST; Material:Carbon steel shell w; Shaft Dia., Nominal (d):3.7500; Wall Thickness (S3):0.095; Housing Bore Dia. (Dh) - 3.9372:3.9358; |