| LangID | 1 |
| SRIX | 0.065 |
| SDM_ | 132.485 |
| Prod_Type3 | ACBB_SR_MM_DB |
| ALP21 | 30 |
| DE_ | 149.253 |
| da | 115 |
| KBRG | 7124 |
| m0 | 0.671 |
| ra | 2 |
| d | 105 |
| 2B_ | 52 |
| ALPHA_ | 30 |
| C0 | 163 |
| rb | 1 |
| SREX | 0.065 |
| D_ | 160 |
| D_b | 154 |
| Oil rpm | 4500 |
| hidYobi | 7021ADB |
| T48 Cylindrical Roller Bearings | Dimension M:2.37 in; Pre Install Clearance Max:0.0031 in; e - Geometry Factor:0.22; Shaft Size Type:Metric; C - Dynamic Load (Basic):49900 lb; Dimension K:1.25 in; C0 - Static Load:54100 lb; Dimension E:2.75 in; Dimension B:6.83 in; Weight:28 lb; Oil Lubrication - B/C/O Seal:1300 rpm; Dimension D Ma |
| L357049NW/L357010 Angular Contact Ball Bearings | r:1; D_a max:42; dd min:32; da:25; C0:22.6; db max:25; hidTable:ecat_NSCLDR; DE_:41.5; LangID:1; r1:0.6; GRS rpm:13000; Oil rpm:16000; rb:0.6; SDM_:34; yobi:NUP204ET; DA_:7.5; d:20; SBRG:2; dc min:29; Z_:11; |
| 23056 E1A-MB1-C3 Cam Follower And Track Roller | Cage Type:EJ; L:410.00 mm; Material :Cast Iron; Locating Rings (width x OD):SR200X6.5; J2:378 mm; H1:125.0 mm; N:18 mm; Shaft Diameter da:95 mm; Seal:TSNG319; J1:70 mm; C1 Dynamic Load Rating:694; C0 Static Load Rating:774; Bolt Qty:2; H2:45.0 mm; A:175.00 mm; Shaft Diameter db:110 mm; Max Oil |
| T911 Thrust Ball Bearings | SREX:0.05; DE_:174.488; C:133; Prod_Type3:DGBB_SR_OT; da min:116; DA_:26.988; r:2.1; KBRG:6101; mass:3.79; GRS rpm:3400; C_conv:133000; DI_:120.512; B_:36; SRIX:0.05; SRIN:-0.05; ra:2; yobi:6221; hidYobi:6221; d:105; SRI:13.97; |
| DX760136 / DX307395 Needle Roller Bearings | R - Inner Ring To Clear Radius1:1.5 mm; d:40 mm; da - Inner Ring Backing Diameter:53.000 mm; Cg - Geometry Factor8:0.0458; Design Unit:METRIC; B - Inner Ring Width:33 mm; C1(2) - Dynamic Radial Rating (Two-Rows):155000 N; Reference Thermal Speed Rating (Grease):5600; Y1 - ISO Factor5:2.79; UPC Code: |
| T691 Spherical Roller Bearings | Diameter d :6 7/16 in; Tolerance1:-0.005 in; Sleeve:S-36; Lockwasher and Lockplates:W-36; Locknut:AN-36; S:1.250 in; Bearing Number:22236K; Taper:1:12; SNW/SNP Assembly Weight:20.5 lb; Series:222K; D1:9.068 in; B2:5.028 in; |
| T711 Needle Roller Bearings | Shaft Size:4-3/16 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Housing Width:8.3 in; Bearing Number:HSE403BR; Seal Type:Felt Type; Bearing - Housing - Seal:HSE403BRH; Note:This product line wa; Dimension H:7.756 in; Dimension H1:1.5 in; Bolt Size:4 x M24; Maximum Speed:1640 rpm; Ca - Axial L |
| 23240 E1A-K-MB1 Needle Aircraft Roller Bearings | Series:67300; D:7.7500 in; Y - ISO Factor4:1.74; K - Factor2:1.7; C1 - Cup Flange Width:0.2813 in; Cup Part Number:67322-B; Da - Cup Frontface Backing Diameter:7.59 in; Design Units:Imperial; r - Cup Backface To Clear Radius1:0.130 in; D1 - Flange Outer Diameter:8.0272 in; C - Cup Width:1.5000 in; C |
| M667947DGW-911-911D Plain Bearings | Series:M88000; Design Units:Imperial; Cup Part Number:M88022; Y - ISO Factor3:1.1; Cg - Geometry Factor:0.0771; r - Cup Backface To Clear Radius1:0.030 in; Da - Cup Frontface Backing Diameter:2.72 in; C - Cup Width:0.6875 in; e - ISO Factor2:0.55; D:3 in; Db - Cup Backface Backing Diameter:2.44 in; |
| H247549/H247510CD Tapered Roller Bearings | Y0:2.4; yobi:1305K; SRIX:0.04; groove outer:53.059; cyl dia:8.731; Oil rpm:13000; hidTable:ecat_NSSAB; PCD:43.6; X2:0.65; D_:62; cyl count:12; SRI:4.58; C:18.2; B_:17; mass:0.255; LangID:1; Y3:2.3; hidYobi:1305K; r:1.1; C0:5; |
| M 255449 D/410/410 D Tapered Roller Bearings | Bolt Size:2 x M24; Dimension H1:1.7 in; Housing Width:5.3 in; Support Type:Two-Bolt Plummer Blo; Bearing Type:Split Cylindrical Ex; Seal Type:Viton Single Lip; Cr - Dynamic Load Rating:42039 lbf; Bearing UPC:013992030733; Bearing - Housing - Seal UPC:013992063106; Shaft Size:80 mm; Note:This product |
| NU2276-E-M1A Tapered Roller Bearings | W1:3.58 mm; Relief Diameter A:67.87 mm; B:97.23 mm; Lockwasher:W 14; C1:92.20 mm; Locknut:N 14; L2:13.49 mm; Major Diameter:69.88 mm; Threads No. per Inch:18; Diameter S-3:66.68 mm; Bearing Bore:70 mm; H3:3.2 mm; S4:7.92 mm; D:14.60 mm; R:70.89 mm; s:7.37 mm; M5:6.35 mm; Q:1.35 mm; |
| FC689628 Needle Self Aligning Roller Bearings | Piston Area:44100 mm²; Assembly Weight:58.200 Kg; Piston Length of Travel:17 mm; Threads B:Tr450x5; A:12 mm; D:64.00 mm; C:580.0 mm; E:530 mm; E1:452 mm; |
| 22232 E1A-M-C3 Needle Non Thrust Roller Bearings | B:0.8438 in; R - Fillet Radius Shaft (Max):0.03 in; Steering Pivot Rating:10600 lbf; Weight:0.8 lb; Bearing Type:Thrust Tapered Rolle; Oil Holes in Retainer:No; D - Bearing O.D.:2.8590 in; d - Bore Diameter:1.6350 in; |
| 23156VAB Thrust Ball Bearings | Bearing Number:LSE500BR; Dimension P:0.9 in; Bolt Size:4 x M24; Dimension V:0.1 in; Dimension H:3.9 in; Series Type:Light Series; Shaft Size:5 in; Seal Type:Felt Seal; Support Type:Round Flange; Dimension N:12.375 in; Dimension L:7.0 in; Note:This product line wa; Dimension R:14.7 in; Ca - Axial Loa |
| HM265049ZD/010/010D Tapered Roller Bearing Assemblies | Note:This product line wa; Dimension C:2.953 in; Bearing Type:Split Cylindrical Ex; Cr - Dynamic Load Rating:42039 lbf; Series Type:Light Series; Support Type:Hanger Block; Dimension X (Thread):M36; Dimension H:4.5 in; Cor - Static Load Rating:51931 lbf; Shaft Size:85 mm; Dimension L:5.7 in; Maximum |
| No. | Brand | N | e | T | J | A | D | i | C |
| L163149/1 | - | - | - | - | - | - | 2.7170 in | - | - |
| HM265049 | - | - | - | - | - | - | 66.675 mm | - | - |
| 7502724M | - | - | - | - | - | - | 63.500 mm | - | - |
| HM261049 | - | - | - | - | - | - | - | - | - |
| T911 | - | - | - | - | - | - | - | - | 133 |
| T-611 | - | - | - | - | - | - | 140.000 mm | - | - |
| T611 | - | - | 9.0 mm | - | - | - | - | - | - |
| 2687/1049 | - | - | - | - | - | - | - | - | 26 |
| T451 | - | - | - | - | - | - | - | - | - |
| 690RX2966CF1 | - | - | - | - | - | - | - | - | - |
| HM266449DW/410/410D | - | - | - | - | - | - | - | - | - |
| NCF 1872 V | - | - | 15.0 mm | - | - | - | - | - | - |
| 23168 CCK/W33+OH 3168H | - | - | - | 0.645 in | - | - | - | - | - |
| 771/630 | - | - | - | - | - | - | - | - | - |
| H247549/H247510CD | - | - | - | - | - | - | - | - | 18.2 |
| M 270449 DW/410/410 D | - | - | - | - | - | - | 24.9950 in | - | - |
| T911 A | - | - | - | - | - | - | - | - | - |
| T48 | - | - | - | - | - | - | - | - | - |
| EE420751/421451D | - | - | - | - | - | - | - | - | - |
| T1452 | - | - | - | - | - | - | 2.3612 in | - | - |
| LM 119348 D/11/11 D | - | - | - | - | - | - | 4.6250 in | - | - |
| 294/850EF | - | - | - | - | - | - | - | - | - |
| HM262749DW/710/710D | - | - | - | - | - | - | 4.3307 in | - | - |
HH924349/HH924310D Needle Self Aligning Roller Bearings Video
Tapered roller bearings - features, benefits, applications | SKF
SKF Tapered roller bearings feature a cup and cone assembly. The cup is comprised of the outer ring and the cone assembly consists of inner ring, rollers, and
Tapered Roller Bearing Assemblies | BDI United States / BDI
10092 Items - NA497SW-90221 TAPERED ROLLER BEARING ; 3-3/8" BORE 6-1/4" OD ... Assembly Components: NA497-SW (2) | K109597 (1) | K109596 (2)
RBC - TYSON Tapered Roller Bearings
Tapered roller bearings consist of 2 basic components: the cup and the cone assembly. The cup is the outer ring and is a separate component. The cone
Taper Roller Bearings - Products - NSK Americas
Quick Assembly Taper Roller Bearings. Offers superior roller stability after assembling the cup and the cone achieving quick & high precision preload setting - for
Tapered Roller Bearing Full Assemblies - Brand: Timken
1728 Items - Buy Tapered Roller Bearing Full Assemblies direct from Motion Industries. Your proven service leader with reliable delivery since 1972
Tapered Roller Bearing Full Assemblies - Brand: SKF - Motion
224 Items - Tapered Roller Bearing Full Assembly - 50 mm Bore, 90 mm OD, 20 mm Cone Width, 17 mm Cup Width. Mi Item # 00131549. Manufacturer Description:
Tapered Roller Bearings | The Timken Company
Timken® tapered roller bearing assemblies are precisely designed to manage both radial and axial loads, even in the most unforgiving conditions. Home
Tapered Roller Bearings | Roller Bearings | Products | NSK
Since they are separable, the cone assemblies and cups can be mounted independently. Depending upon the contact angle, tapered roller bearings are divided