GRS rpm | 5300 |
yobi | N1016 |
r | 1.1 |
da | 86.5 |
Z_ | 21 |
DA_ | 11 |
Ew | 113.5 |
C | 72.5 |
Oil rpm | 6300 |
d | 80 |
TSR rpm | 6000 |
SDM_ | 102.5 |
rb | 1 |
D_ | 125 |
C_conv | 72500 |
LangID | 1 |
SBRG | 10 |
r1 | 1 |
hidYobi | N1016 |
DE_ | 113.5 |
EE420801/421451CD Thrust Roller Bearing | d:1.3750 in; a - Effective Center Location4:-0.45 in; Aa - Cage-Cone Backface Clearance:0.31 in; B - Cone Width:1.0520 in; Cg - Geometry Factor:0.0668; K - Factor8:1.53; Ab - Cage-Cone Frontface Clearance:0.07 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:2080 lbf; Cage Type:Stamped Ste |
LM247748DW/LM247710-LM247710D Tapered Roller Bearings | C0 Static Load Rating:623; Material :Cast Iron; Bearing:22317K; Jmax:326 mm; Housing:SNT 520-617; A:160.00 mm; Locating Rings (width x OD):SR180X5; L:380.00 mm; H:218 mm; H2:40 mm; C1 Dynamic Load Rating:569; J:320.00 mm; End Cover2:EC520-617; N1:32.00 mm; Housing Mass:17.6 Kg; Max Grease Speed |
618/530MA Spherical Roller Bearings | Tensioning Unit Type:Tension Type; Bearing Number:LSE204BR; Note:This product line wa; Dimension R:1.1 in; Dimension W:1.2 in; Dimension S:1.5 in; Dimension P:0.8 in; Bearing - Housing - Seal UPC:013992101471; Dimension D:8.0 in; Seal Type:Viton Single Lip; Shaft Size:2.25 in; Dimension N:9.3 in; Be |
NF1956MC4 Complex Bearings | Cg - Geometry Factor7:0.243; Y2 - ISO Factor6:2.29; D:22.5000 in; K - Factor3:1.33; Design Units:Imperial; C - Double Cup Width:5.7500 in; r - Cup Frontface To Clear Radius2:0.06 in; Da - Cup Frontface Backing Diameter:21.72 in; Y - ISO Factor1:1.37; Y1 - ISO Factor5:1.54; Series:LM769300; e - ISO F |
7330B MP Needle Aircraft Roller Bearings | B_:80; ra max:2; Prod_Type3:CRB_SR_NNU_TB; da max:262; Oil rpm:2000; DE_:299; d1a min:254; Z_:40; KBRG:4248; D_:320; SDM_:281; Fw:263; GRS rpm:1600; d:240; DI_:263; LangID:1; dc min:269; mass:18; yobi:NNU4948K; da min:251; |
531817 Cylindrical Roller Bearings | Support Type:Take-Up; Dimension B:8.5 in; Dimension A:9.0 in; Dimension T:17.5 in; Bearing - Housing - Seal UPC:013992089687; Dimension D:13.5 in; Ca - Axial Load Rating:4181.39 lbf; Bearing Number:LSE408BR; Dimension V:6.4 in; Dimension S:2.8 in; Cr - Dynamic Load Rating:71040 lbf; Bearing - Housin |
LM241149NW/LM241110D Needle Roller Bearings | da:12.6; KBRG:6101; C:3.35; mass:10; D_:22.225; SRIN:-0.015; fo:12.8; C1:1.57; d:9.525; Z_:7; B0:5.558; DA_:3.969; yobi:FR6; D1:24.613; SRI:2.04; C_1:1.57; DE_:19.869; SRIX:0.015; r:0.4; SREX:0.03; |
M272647DW/10/10D Needle Aircraft Roller Bearings | GRS rpm:8000; mass:0.394; C0:29.5; da:36; Oil rpm:11000; Prod_Type3:ACBB_SR_MM_DT; hidTable:ecat_NSANGB; r1:0.6; SRE:4.95; B_:16; D_a:56; C_conv:36500; d:30; SRIX:0.04; KBRG:7321; ra:1; m0:0.375; 2B_:32; SBRG:2; DI_:36.419; |
24168 B.C3 Thrust Roller Bearings | Dimension L:7.7 in; Bearing - Housing - Seal:LSE708BRHATL; Shaft Size:7.5 in; Dimension N:15.750 in; Dimension T:21.0 in; Bearing Number:LSE708BR; Dimension V:0.1 in; Maximum Speed:1070 rpm; Bearing Type:Split Cylindrical Re; Support Type:Round Flange; Ca - Axial Load Rating:9217 lbf; Bearing - Hous |
23168 B MB Cylindrical Roller Bearings | Series:39500; Cg - Geometry Factor11:0.107; Y1 - ISO Factor9:1.99; Design Units:Imperial; K - Factor7:1.72; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:77400 lbf; Aa - Cage-Cone Backface Clearance:0.05 in; r - Cup Frontface To Clear Radius2:0.03 in; Ca90 - Dynamic Thrust Rating (90 |
T112 Needle Aircraft Roller Bearings | R - Cone Backface To Clear Radius1:0.09 in; r - Cup Frontface To Clear Radius2:0.03 in; Cg - Geometry Factor12:0.0859; Cup Part Number:384ED; d:2 in; C - Double Cup Width:1.5620 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:3810 lbf; db - Cone Backface Backing Diameter:2.4 in; K - Facto |
NU1292-M1A Needle Aircraft Roller Bearings | Cg - Geometry Factor11:0.0946; G1 - Heat Generation Factor (Roller-Raceway)10:49.1; r - Cup Backface To Clear Radius2:0.130 in; G2 - Heat Generation Factor (Rib-Roller End):14.2; D:4.0000 in; Cup Part Number:49520-B; T - Bearing Width to Flange:0.4688 in; D1 - Flange Outer Diameter:4.2148 in; e - IS |
T1605 Thrust Roller Bearing | d:60; SDM_:86; dd min:80; ra:1.5; hidTable:ecat_NSCLDR; D_a max:102; C_conv:97500; DE_:100; C0:107; C:97.5; GRS rpm:5300; Z_:16; hidYobi:NJ212ET; LangID:1; mass:0.825; Prod_Type3:CRB_SR_NJ; B_:22; r:1.5; DA_:14; da:68; |
EE161400/161901DC Thrust Roller Bearing | Series Type:Medium Series; Pillow/Plummer Block Style:Split Cylindrical Ho; Bearing UPC:013992034557; Housing Width:10.4 in; Weight:1190 lb; Dimension J2:21.0 in; Dimension L:36.0 in; Dimension K:10.0 in; Dimension M:13.0 in; Ca - Axial Load Rating:25583 lbf; Bearing Type:Split Cylindrical Re; Dimen |
M 240631 T/611 TD/611 D Thrust Roller Bearings | Features:Non-Contact Seals; Weight:2.15 Kg; Oil Reference Speed:6900 rpm; Clearance:C0 (Normal); Outside Diameter D:160.000 mm; C0r - Static Load Rating:71.5 kN; Grease Reference Speed:4800 rpm; Radius Rs min:2.000 mm; Outside Ring Width B:30.000 mm; Bore Size d:90 mm; Cr - Dynamic Load Rating:96 kN |
NCF 18/670 V Tapered Roller Bearings | Cr:55; hidYobi:MR128ZZ1; DE_:11.1; hidTable:ecat_NSESBM; C0r:28; SRI:0.67; Prod_Type3:ESM_MD_ZZ; SREX:0.02; Z_:12; mass:0.97; D_b:11.3; DI_:8.7; DA_:1.2; LangID:1; fo:15.914; yobi:MR128ZZ1; SRE:0.67; r1:0.1; rb:0.1; db:9; |
No. | Brand | N | e | T | J | A | D | i | C |
23168 CCK/W33+OH 3168H | - | - | - | 0.645 in | - | - | - | - | - |
67885DW, 67820,67820CD | - | - | - | - | - | - | 110.000 mm | - | - |
23240 E1A-K-MB1 | - | - | - | - | - | - | 7.7500 in | - | - |
EE350750/351687 | - | - | - | - | - | - | 3.6250 in | - | - |
EE161400/161901DC | - | - | - | - | - | - | - | - | - |
HM261049 | - | - | - | - | - | - | - | - | - |
332/334 | - | - | - | - | - | - | - | - | - |
T7519 | - | - | - | - | - | - | 290.000 mm | - | - |
531817 | - | - | - | - | - | - | - | - | - |
HM133426-90372 | - | - | - | - | - | - | - | - | - |
L357049NW/L357010 | - | - | - | - | - | - | - | - | - |
T511 | - | - | - | - | - | - | - | - | - |
23168 B MB | - | - | - | - | - | - | 4.4375 in | - | - |
NCF 18/670 V | - | - | - | - | - | - | - | - | - |
M667947D/M667910-M667910D | - | - | - | - | - | - | - | - | 25.7 |
239/530CAKW33 | - | - | - | - | - | - | - | - | 217 |
29256 E1.MB | - | - | - | - | - | - | - | - | - |
HM265049TD/1 | - | - | - | - | - | - | - | - | - |
M667948/M667911 | - | - | - | - | - | - | - | - | 72.5 |
L357049NW/L357010 C.D | - | - | - | - | - | - | 2.6762 in | - | - |
7048BGM | - | - | - | - | - | - | 1060.000 mm | - | - |
530897 Plain Bearings Video
Taper Roller Bearings - Products - NSK Americas
Quick Assembly Taper Roller Bearings. Offers superior roller stability after assembling the cup and the cone achieving quick & high precision preload setting - for
Tapered Roller Bearings | The Timken Company
Timken® tapered roller bearing assemblies are precisely designed to manage both radial and axial loads, even in the most unforgiving conditions. Home
Tapered Roller Bearing Full Assemblies - Brand: SKF - Motion
224 Items - Tapered Roller Bearing Full Assembly - 50 mm Bore, 90 mm OD, 20 mm Cone Width, 17 mm Cup Width. Mi Item # 00131549. Manufacturer Description:
Tapered Roller Bearing Full Assemblies - Brand: Timken
1728 Items - Buy Tapered Roller Bearing Full Assemblies direct from Motion Industries. Your proven service leader with reliable delivery since 1972
Tapered roller bearings - features, benefits, applications | SKF
SKF Tapered roller bearings feature a cup and cone assembly. The cup is comprised of the outer ring and the cone assembly consists of inner ring, rollers, and
Tapered Roller Bearing Assemblies | BDI United States / BDI
10092 Items - NA497SW-90221 TAPERED ROLLER BEARING ; 3-3/8" BORE 6-1/4" OD ... Assembly Components: NA497-SW (2) | K109597 (1) | K109596 (2)
RBC - TYSON Tapered Roller Bearings
Tapered roller bearings consist of 2 basic components: the cup and the cone assembly. The cup is the outer ring and is a separate component. The cone
Tapered Roller Bearings | Roller Bearings | Products | NSK
Since they are separable, the cone assemblies and cups can be mounted independently. Depending upon the contact angle, tapered roller bearings are divided