SRIX | 0.04 |
2B_ | 24 |
r | 0.6 |
Oil rpm | 12000 |
GRS rpm | 9000 |
SREX | 0.04 |
ra | 0.6 |
hidYobi | 7910A5DF |
Prod_Type3 | ACBB_SR_MM_DF |
mass | 0.264 |
LangID | 1 |
db | 55 |
SRI | 3.51 |
DI_ | 54.242 |
m0 | 0.273 |
SBRG | 19 |
ao | 16.5 |
rb | 0.6 |
ALPHA_ | 25 |
DE_ | 67.794 |
93825/93127CD Cylindrical Roller Bearings | Features:Open; Cr - Dynamic Load Rating:58.8 kN; Oil Limiting Speed:4800 rpm; Radius Rs min:1.000 mm; Grease Limiting Speed:3300 rpm; Outside Diameter D:180.000 mm; Weight:1.4 Kg; Clearance:C3; Bore Size d:120 mm; Outside Ring Width B:19.000 mm; C0r - Static Load Rating:60.4 kN; |
HM 262449 DW/410/410 D Needle Roller Bearings | ALPHA_:30; C_conv:167000; SRIX:0.08; Prod_Type3:ACBB_SR_MM_DB; C:167; SRI:10.73; ALP21:30; DE_:138.27; Oil rpm:4300; SBRG:2; C0:178; ra:2; da:95; B_:28; SREX:0.08; hidTable:ecat_NSANGB; GRS rpm:3000; DI_:96.752; Z_:16; hidYobi:7217AWDB; |
T651 Thrust Roller Bearing | Y1 - ISO Factor9:2.04; Aa - Cage-Cone Backface Clearance:0 in; r - Cup Backface To Clear Radius2:0.06 in; Bearing Weight:115.100 lb; B - Double Cone Width:6.5000 in; Ab - Cage-Cone Frontface Clearance:0.18 in; C - Cup Width:1.9375 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5 |
230SM160MA Needle Non Thrust Roller Bearings | Cr - Dynamic Load Rating:118025 lbf; Tensioning Unit Type:Push Type; Dimension P:1.0 in; Support Type:Take-Up; Bearing Number:MSE411BR; Dimension Y:0.9 in; Maximum Speed:1600 rpm; Dimension H:2.2 in; Ca - Axial Load Rating:8588 lbf; Dimension U:0.3 in; Bearing Type:Split Cylindrical Re; Bearing - Ho |
H15002707A Needle Non Thrust Roller Bearings | Design Units:Imperial; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:13700 lbf; d:2.5591 in; G2 - Heat Generation Factor (Rib-Roller End):23; Cone Part Number:478W; C1 - Dynamic Radial Rating (1 million revolutions)6:30500 lbf; db - Cone Backface Backing Diameter:3.03 in; Aa - Ca |
7352M Needle Self Aligning Roller Bearings | D:6.6250 in; Series:835; Y - ISO Factor3:2; Db - Cup Backface Backing Diameter:5.83 in; Cup Part Number:833W; Cg - Geometry Factor:0.0937; r - Cup Backface To Clear Radius1:0.130 in; C - Cup Width:1.7500 in; Design Units:Imperial; e - ISO Factor2:0.3; Da - Cup Frontface Backing Diameter:6.14 in; |
LM274449DGW-410-410D Thrust Roller Bearings | L11:179.00 mm; Weight:15.10 Kg; Taper:1:12; d1:240.00 mm; Thread D12:Tr280x4; Appropriate Withdrawal Nut No.:HM 56 T; b:26 mm; L:172.00 mm; Appropriate Hydraulic Nut:HMV56; |
LM241149NW/LM241110D Needle Roller Bearings | da:12.6; KBRG:6101; C:3.35; mass:10; D_:22.225; SRIN:-0.015; fo:12.8; C1:1.57; d:9.525; Z_:7; B0:5.558; DA_:3.969; yobi:FR6; D1:24.613; SRI:2.04; C_1:1.57; DE_:19.869; SRIX:0.015; r:0.4; SREX:0.03; |
294/5 Needle Aircraft Roller Bearings | C - Dynamic Load (Basic):46400 lb; Shaft Size Type:Metric; Y2 - Geometry Factor:4.15; Dimension KA:1.24 in; Full Timken Part Number:99999B; Oil Lubrication - T Seal:3200 rpm; Dimension E:4.77 in; Bearing Number:22213; Grease Lubrication - M/N Seal:1800 rpm; Dimension L Exp:3.67 in; Shaft Size & |
HM261049 Complex Bearings | K - Factor8:1.41; G1 - Heat Generation Factor (Roller-Raceway):227; C0 - Static Radial Rating:377000 N; WPD:170.4 mm; R - Cone Backface To Clear Radius3:3.560 mm; da - Cone Frontface Backing Diameter:128 mm; B - Cone Width:36 mm; Design Units:METRIC; Series:M624600; Ca90 - Dynamic Thrust Rating (90 |
M259030T-90054 Plain Bearings | C0 - Static Radial Rating:11100 N; Ce - Dynamic Radial Rating1:15100 N; D:62 mm; Limiting Speed (Grease):20200 rpm; Contact Angle:25 º; do - Ball Diameter:6.350 mm; Full Timken Part Number:3MM9308WICRDUH; Ball Type:STEEL; Bearing Weight:0.11 Kg; Precision Class:ISO P4S (ABEC 7/9); Design Units:METRI |
T411 Cylindrical Roller Bearings | Y2 - ISO Factor10:1.14; Cg - Geometry Factor11:0.12; B - Cone Width:1.0594 in; Ab - Cage-Cone Frontface Clearance:0.16 in; e - ISO Factor8:0.88; R - Cone Backface To Clear Radius1:0.14 in; db - Cone Backface Backing Diameter:2.72 in; Design Units:Imperial; d:1.8750 in; Series:55000C; Y1 - ISO Factor |
FC4056200E Needle Non Thrust Roller Bearings | UPC Code:087796312111; Y2 - ISO Factor6:2.44; Cage Type:EMB; Reference Thermal Speed Rating (Oil)7:1700; Y1 - ISO Factor5:3.72; C1(2) - Dynamic Radial Rating (Two-Rows):1580000 N; Da - Outer Ring Backing Diameter:323.000 mm; Superseded Part:22240YMBW507C08C3; Cage Material:Brass; D:360.000 mm; da - |
29326 E Spherical Roller Bearings | Dimension H:1.28 in; Dimension RA:0.16 in; C - Dynamic Load (Basic):79700 lb; Grease Lubrication - B/C/O Seal:1000 rpm; Pre Install Clearance Max:0.0039 in; Oil Lubrication - M/N Seal:1400 rpm; Dimension N:3.400 in; Dimension BC:9.5 in; Housing Style:Four-Bolt Square Fla; Dimension E:6.72 in; Dimens |
M 255449 D/410/410 D Tapered Roller Bearings | Bolt Size:2 x M24; Dimension H1:1.7 in; Housing Width:5.3 in; Support Type:Two-Bolt Plummer Blo; Bearing Type:Split Cylindrical Ex; Seal Type:Viton Single Lip; Cr - Dynamic Load Rating:42039 lbf; Bearing UPC:013992030733; Bearing - Housing - Seal UPC:013992063106; Shaft Size:80 mm; Note:This product |
T16021 Tapered Roller Bearings | Oil Holes:3 mm; Inner rings PCD:112 mm; B:25 mm; da:139 mm; d:90 mm; Chamfer:1.5 mm; Dynamic Load Rating:46 kN; Mounting Hole Countersink Diameter:14 mm; Number of Mounting Holes:12; Mounting Hole Size:9 mm; D:210 mm; Static Load Rating:80.2 kN; Outer rings PCD:187 mm; Da:157 mm; |
No. | Brand | N | e | T | J | A | D | i | C |
29326 E | - | - | - | - | - | - | - | - | - |
NU2276-E-M1A | - | - | - | - | - | - | - | - | - |
T691 | - | - | - | - | - | - | - | - | - |
HH255149D/1 | - | - | - | - | - | - | - | - | - |
48290DGW/48220 | - | - | - | - | - | - | - | - | - |
NU3184 | - | - | - | - | - | - | - | - | - |
LM272235/LM27221 | - | - | - | - | - | - | - | - | - |
230SM160MA | - | - | - | - | - | - | - | - | - |
T451 | - | - | - | - | - | - | - | - | - |
HM120848/120817XD | - | - | - | - | - | - | - | - | - |
EE130900D-902ASSY | - | - | - | - | - | - | - | - | - |
HM 266449 DW/410/410 D | - | - | - | - | - | - | - | - | 23 mm |
47TS483434-1WSGFCS150 | - | - | - | - | - | - | - | - | - |
EE420801/421451CD | - | - | - | - | - | - | - | - | - |
M 255449 D/410/410 D | - | - | - | - | - | - | - | - | - |
T811 X | - | - | - | - | - | - | - | - | - |
67990/67220CD | - | - | - | - | - | - | - | - | - |
NJ 2348 EX.M1A.C3 | - | - | - | - | - | - | - | - | - |
23156VAB | - | - | - | - | - | - | - | - | - |
M241547/M241513XD | - | - | - | - | - | - | 140 mm | - | - |
H247535/H247510D Complex Bearings Video
Tapered Roller Bearing Full Assemblies - Brand: Timken
1728 Items - Buy Tapered Roller Bearing Full Assemblies direct from Motion Industries. Your proven service leader with reliable delivery since 1972
Taper Roller Bearings - Products - NSK Americas
Quick Assembly Taper Roller Bearings. Offers superior roller stability after assembling the cup and the cone achieving quick & high precision preload setting - for
Tapered Roller Bearing Full Assemblies - Brand: SKF - Motion
224 Items - Tapered Roller Bearing Full Assembly - 50 mm Bore, 90 mm OD, 20 mm Cone Width, 17 mm Cup Width. Mi Item # 00131549. Manufacturer Description:
Tapered roller bearings - features, benefits, applications | SKF
SKF Tapered roller bearings feature a cup and cone assembly. The cup is comprised of the outer ring and the cone assembly consists of inner ring, rollers, and
RBC - TYSON Tapered Roller Bearings
Tapered roller bearings consist of 2 basic components: the cup and the cone assembly. The cup is the outer ring and is a separate component. The cone
Tapered Roller Bearings | The Timken Company
Timken® tapered roller bearing assemblies are precisely designed to manage both radial and axial loads, even in the most unforgiving conditions. Home
Tapered Roller Bearing Assemblies | BDI United States / BDI
10092 Items - NA497SW-90221 TAPERED ROLLER BEARING ; 3-3/8" BORE 6-1/4" OD ... Assembly Components: NA497-SW (2) | K109597 (1) | K109596 (2)
Tapered Roller Bearings | Roller Bearings | Products | NSK
Since they are separable, the cone assemblies and cups can be mounted independently. Depending upon the contact angle, tapered roller bearings are divided