| db - max. | 82.1 mm |
| d1 | 82.9 mm |
| Outer Diameter (mm) | 65 |
| Fatigue load limit Pu | 2.2 kN |
| Preload class A - GA | 400 N |
| Attainable speed for grease lubrication | 13000 r/min |
| Calculation factor f2A | 1 |
| Calculation factor f1 | 0.99 |
| da min. | 74 mm |
| D2 | 105.3 mm |
| da - min. | 74 mm |
| Calculation factor - Y1 | 0.92 |
| Limiting speed for grease lubrication | 13000 r/min |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor - X2 | 0.41 |
| Preload class A | 209 N/micron |
| d2 | 82.9 mm |
| db max. | 82.1 mm |
| Calculation factor (single, tandem) Y2 | 0.87 |
| a | 33.2 mm |
| 12.30.1800.000.11.1503 Standard 5 Slewing Ring Bearings | da:254; Oil rpm:670; B_:135.3; ra max.:4 mm; A_:84; D1:164 mm; Bore Diameter (mm):160; Da max.:226 mm; hidTable:ecat_NSSDTB; Basic static load rating (C0):2210 kN; D_:320; da min.:254 mm; T:135,3 mm; Bearing number:53432X; SRE:30.8; hidYobi:53432X; Size (mm):160x320x135.3; Prod_Type3:TB_SD_WAS; d1:3 |
| 92.20.1146.990.11.1503 Standard 5 Slewing Ring Bearings | B:16 mm; D:52 mm; Outer Diameter (mm):52; r3 min.:1.5 mm; Basic dynamic load rating (C):32,5 kN; C:12 mm; Calculation factor (e):0.55; Width (mm):16.25; Weight:0.167 Kg; Bearing number:30304C; Basic static load rating (C0):32 kN; r4 min.:1.5 mm; (Oil) Lubrication Speed:10000 r/min; r1 min.:1.5 mm; B |
| 12.25.1360.601.21.1503 Standard 5 Slewing Ring Bearings | l5:10 mm; W:27 mm; d:18 mm; l7 min.:25 mm; C1:17,5 mm; Width (mm):23; Basic dynamic load rating (C):29 kN; d2:44 mm; Bore Diameter (mm):18; D:35 mm; l4 max.:94 mm; d4:25 mm; Angle:15 °; Bearing number:TSF 18 C; l3 min.:27 mm; Size (mm):18x35x23; Outer Diameter (mm):35; r min.:0,3 mm; d1:21,8 mm; |
| 12.30.1381.000.11.1503 Standard 5 Slewing Ring Bearings | d:325 mm; Dce:484 mm; Ni:24 mm; D:484 mm; Ne:24 mm; Fe:460 mm; H:56 mm; Width (mm):56; Z:67 mm; Outer Diameter (mm):484; Size (mm):325x484x56; Di:325 mm; de:415 mm; dci:411 mm; m:5 mm; Bearing number:ZR1.14.0414.201-3SPT; Bore Diameter (mm):325; Fi:375 mm; Dp:335 mm; |
| 162.25.1250.890.11.1503 Standard 5 Slewing Ring Bearings | C:46 mm; Bore Diameter (mm):120; Basic dynamic load rating (C):347,9 kN; Weight:4,2 Kg; d:120 mm; Bearing number:23024-2RS; Size (mm):120x180x46; D:180 mm; Outer Diameter (mm):180; Basic static load rating (C0):499,8 kN; B:46 mm; K:3 mm; Width (mm):46; |
| 282.30.1300.013 Type 110/1500.2 Standard 5 Slewing Ring Bearings | d:25 mm; Bore Diameter (mm):25; nB:9400 1/min / Referen; nG:12400 1/min / Limiti; Size (mm):25x62x25.4; Cur:1410 N / Fatigue lim; Width (mm):25,4; d1:39,5 mm; m:0,355 kg / Weight; da min:32 mm; Bearing number:3305-BD; Outer Diameter (mm):62; D1:51,5 mm; α:30 ° / Angle; ra max:1 mm; rmin:1, |
| 162.36.2000.891.41.1503 Standard 5 Slewing Ring Bearings | B:24 mm; Basic static load rating (C0):54 kN; Outer Diameter (mm):150; D:150 mm; Weight:1,25 Kg; d:100 mm; (Grease) Lubrication Speed:4200 r/min; Size (mm):100x150x24; Bore Diameter (mm):100; C:24 mm; Bearing number:6020 ZZ; Basic dynamic load rating (C):60,5 kN; Width (mm):24; |
| 161.36.1700.891.41.1503 Standard 5 Slewing Ring Bearings | Bore Diameter (mm):25,000; d:25,000 mm; C:40,000 mm; Size (mm):25x38x40; Bearing number:NK29/20RD2+IR25X29X2; Outer Diameter (mm):38,000; Width (mm):40,000; D:38,000 mm; B:40,000 mm; |
| 191.25.1800.990.41.1502 Standard 5 Slewing Ring Bearings | Bearing number:K43X48X27H; (Refer.)Mass(kg):0.050; Shaft(min.):42.989; Manufacturer Name:KOYO; Basic dynamic load rating (C):34.8 kN; Basic static load rating (C0):78.0 kN; Housing(min.):48.009; Shaft(max.):43.000; Ew:50 mm; (Oil) Lubrication Speed:9800 r/min; Bore Diameter (mm):43; Weight:0.050 Kg; |
| 281.30.1275.013 Type 110/1400.1 Standard 5 Slewing Ring Bearings | D:480 mm; d:350 mm; Bore Diameter (mm):350; Outer Diameter (mm):480; Width (mm):420; Bearing number:E-CRD-7018LL; Size (mm):350x480x420; T:420 mm; |
| 62.30.1120.000.11.1504 Standard 5 Slewing Ring Bearings | Size (mm):750x1090x150; C:150 mm; Bearing number:NU10/750; (Grease) Lubrication Speed:430 r/min; d:750 mm; Basic dynamic load rating (C):4730 kN; Weight:490 Kg; Basic static load rating (C0):8800 kN; Outer Diameter (mm):1090; Bore Diameter (mm):750; Width (mm):150; Fw:830 mm; D:1090 mm; B:150 mm; |
| 161.25.1250.891.21.1503 Standard 5 Slewing Ring Bearings | Shaft Dia., Nominal (d):12.0000; Bore Diameter (mm):12; ID Chamfer Length (Ci):0.300; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Bearing Type:straight; OD Chamfer Length (Co):0.600; Wall Thickness (S3):1.000; Material:Wrapped bronze with; Bearing Outside Diameter, Nominal(Do):14.000; |
| 281.30.1200.013 Type 110/1400.1 Standard 5 Slewing Ring Bearings | Factor (G1):2,9; T1:4,851 mm; D:39,992 mm; C2:2,362 mm; db:24 mm; Factor (G2):5,6; a -:1,5 mm; D1:43,066 mm; Weight:0,07 Kg; Basic static load rating (C0):12,3 kN; Basic dynamic load rating (C90):3,22; Outer Diameter (mm):39,992; C:9,525 mm; Basic dynamic load rating (Ca90):2,9; Bearing number:A6075 |
| 12.20.1360.001.21.1504 Standard 5 Slewing Ring Bearings | dk:38,1 mm; Weight:0,54 Kg; d5:38 r/min; Size (mm):22x42x28; h1:84 mm; B:28 mm; W:32 mm; l3 min.:37 mm; d1:25,8 mm; l4 max.:111 mm; l5:12 mm; Basic dynamic load rating (C):68 kN; Thread (G):M22X1,5; d2:54 mm; d:22 mm; Width (mm):28; Angle:15 °; d4:30 mm; D:42 mm; C1:20 mm; |
| 282.30.1175.013 Type 110/1300.2 Standard 5 Slewing Ring Bearings | Outer Diameter (mm):165,1; C:28,58 mm; B:28,58 mm; Bore Diameter (mm):88,9; D:165,1 mm; Size (mm):88.9x165.1x28.58; Bearing number:LRJ 3.1/2; d:88,9 mm; Width (mm):28,58; |
| 60.25.0955.575.11.1403 Standard 5 Slewing Ring Bearings | Weight / Kilogram:0.831; Bearing number:51215; T:27 mm; Bore 2:3.031 Inch | 77 Mill; Size (mm):75x110x27; Rolling Element:Ball Bearing; Product Group:B00308; d1:110 mm; Single or Double Direction:Single Direction; Da max.:89 mm; Harmonized Tariff Code:8482.10.50.08; Width (mm):27; Other Features:Sin |
| No. | Brand | B | F | M | E | i | I | g | Z |
| 162.25.1250.891.21.1503 | Standard 5 | 80 mm | - | - | - | - | - | - | - |
| 162.25.1077.890.11.1503 | Standard 5 | 120 mm | - | - | - | - | - | - | - |
| 282.30.1100.013 Type 110/1300.2 | Standard 5 | 12 mm | - | - | - | - | - | - | - |
| 62.25.1055.500.11.1503 | Standard 5 | 24 mm | - | - | - | - | - | - | - |
| 12.25.1360.600.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.35.1960.400.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.36.2000.891.41.1503 | Standard 5 | 24 mm | - | - | - | - | - | - | - |
| 60.25.0855.500.11.1503 | Standard 5 | 7,000 mm | - | - | - | - | - | - | - |
| 92.20.1006.990.11.1503 | Standard 5 | 15 mm | - | - | - | - | - | - | - |
| 191.25.1800.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.25.0955.500.11.1503 | Standard 5 | 218 mm | 375 mm | - | - | - | - | - | - |
| 161.36.1700.890.11.1503 | Standard 5 | 31 mm | - | - | - | - | - | - | - |
| 61.20.1094.500.01.1503 | Standard 5 | 96 mm | - | - | - | - | - | - | - |
| 61.25.1155.575.11.1403 | Standard 5 | 16,000 mm | - | - | - | - | - | - | - |
| 60.25.1255.575.11.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.20.1220.000.11.1504 | Standard 5 | 23.00 mm | - | - | - | - | - | - | - |
| 162.28.1500.891.21.1503 | Standard 5 | 19,1 mm | - | - | - | - | - | - | - |
| 162.28.1700.890.11.1503 | Standard 5 | 55 mm | - | - | - | - | - | - | - |
| 11.20.0971.001.21.1504 | Standard 5 | 60 mm | - | - | - | - | - | - | - |
| 92.25.1502.990.11.1503 | Standard 5 | 14 mm | - | - | - | - | - | - | - |
61.40.1800.013.19.1503 Standard 5 Slewing Ring Bearings Video
48 CFR § 19.1503 - Status.
(a) Status as an EDWOSB concern or WOSB concern eligible under the WOSB Program is determined in accordance with 13 CFR part 127.
19.1503 Status. |
19.1503 Status. (a) Status as an EDWOSB concern or WOSB concern eligible under the WOSB Program is determined in accordance with 13 CFR part 127.
Federal Acquisition Regulation 19.1503
Women-Owned Small Business (WOSB). Program. (b) The purpose of the WOSB Pro- gram is to ensure women-owned small business concerns have an equal oppor-.2 pagesMissing: 61.40.1800.013.19.1503 | Must include: 61.40.1800.013.19.1503