| Housing Bore Dia. (Dh) | 70 +0.030 / +0 |
| Wall Thickness (S3) | 2.505 |
| OD Chamfer Length (Co) | 1.800 |
| Average Clearance (Cd) | 0.0950 |
| Bearing Outside Diameter Tolerance (Do tol.) | 70.1 / 70.055 |
| Bearing number | AST40 6570 |
| Bearing Length Tolerance (B tol.) - +0 / -0.40 | +0 / 0.40 |
| Bearing Bore after Mounting (di) | 65.11 / 64.99 |
| Bearing Outside Diameter, Nominal(Do) | 70.000 |
| Shaft Size (ds) - 65 -0.03 / -0.06 | 65 0.03 / 0.06 |
| Bore Diameter (mm) | 65 |
| ID Chamfer Angle (B deg.) | 45 |
| Bearing Length, Nominal (B) | 70.000 |
| ID Chamfer Length (Ci) | 0.600 |
| Bearing Type | straight |
| Shaft Dia., Nominal (d) | 65.0000 |
| Outer Diameter (mm) | 70 |
| Material | Steel shell with PTF |
| 62.25.1255.500.11.1503 Standard 5 Slewing Ring Bearings | B:70 mm; Bearing number:23222 KCW33+H2322; C:70 mm; D:200 mm; d:110 mm; Size (mm):110x200x70; Bore Diameter (mm):110; Outer Diameter (mm):200; d1:100 mm; B1:105 mm; B2:21 mm; Width (mm):70; |
| 191.20.2000.990.41.1502 Standard 5 Slewing Ring Bearings | H2:62 mm; A2:26 mm; N:26 mm; B:35 mm; H:89 mm; L5:16 mm; L4:65 mm; A5:21.5 mm; Thread (G):M6x1; L1:43,5 mm; L:122 mm; Designation of housing:T305-; d:20 mm; A1:26 mm; J1:12 mm; L3:76 mm; s1:21,5 mm; Adapter sleeve reference:H2305; Designation of bearing:UK305G2H; C:22.36 kN; |
| 92.30.1607.990.11.1502 Standard 5 Slewing Ring Bearings | da min.:520 mm; ra max.:4 mm; Outer Diameter (mm):670; D:670 mm; Bearing number:100DC67170A; Fw:545 mm; da max:541 mm; r min.:5 mm; db min:551 mm; d:500 mm; Size (mm):500x670x170; Weight:171 Kg; Da max.:650 mm; Bore Diameter (mm):500; B:170 mm; Width (mm):170; Basic dynamic load rating (C):2940 kN; |
| 282.30.1475.013 Type 110/1600.2 Standard 5 Slewing Ring Bearings | Dynamic load rating axial (C):10,8 kN; Outer Diameter (mm):26; Bore Diameter (mm):17; C2:8 mm; C1:9 mm; Static load rating radial (C0):15 kN; B:25 mm; Fw:17 mm; Width (mm):25; Static load rating axial (C0):18,2 kN; Size (mm):17x26x25; Dynamic load rating radial (C):11,9 kN; Bearing number:NKX 17 Z; |
| 281.30.1275.013 Type 110/1400.1 Standard 5 Slewing Ring Bearings | D:480 mm; d:350 mm; Bore Diameter (mm):350; Outer Diameter (mm):480; Width (mm):420; Bearing number:E-CRD-7018LL; Size (mm):350x480x420; T:420 mm; |
| 162.36.1800.890.11.1503 Standard 5 Slewing Ring Bearings | Weight:0,134 Kg; D1:48 mm; Bearing number:LMK16; d2:8 mm; d:16 mm; Bore Diameter (mm):16; h:4,4 mm; PCD:38 mm; K:37 mm; D:28 mm; Tolerance perpendicularity (C):12; L:37 mm; d1:4,5 mm; Outer Diameter (mm):28; H:6 mm; Basic dynamic load rating (C):0,77 kN; |
| 11.20.0971.000.11.1504 Standard 5 Slewing Ring Bearings | Inch - Metric:Metric; Outer Diameter (mm):115; d3:115 mm; Minimum Buy Quantity:N/A; UNSPSC:31171552; Overall Height with Aligning Washer:0 Inch | 0 Millimete; Bore 1:2.165 Inch | 55 Mill; Width (mm):71,8; B:15 mm; Noun:Bearing; Weight:3,06 Kg; Bore 2:2.638 Inch | 67 Mill; T2:43,4 mm; D:115 mm; D1:67 |
| 62.20.1094.575.01.1403 Standard 5 Slewing Ring Bearings | r min.:0,3 mm; D:17 mm; C:6 mm; Basic dynamic load rating (C):1,53 kN; Bf:1,2 mm; B:6 mm; Width (mm):6; Bearing number:F606ZZ; Bore Diameter (mm):6; Outer Diameter (mm):17; d:6 mm; Size (mm):6x17x6; Df:19 mm; |
| 92.25.1310.991.21.1503 Standard 5 Slewing Ring Bearings | Size (mm):20x47x15.25; T:15,25 mm; Bearing number:30204; B:14 mm; Basic dynamic load rating (C):28,2 kN; D:47 mm; Width (mm):15,25; C:12 mm; Weight:0,126 Kg; d:20 mm; Basic static load rating (C0):30,5 kN; (Grease) Lubrication Speed:8000 r/min; Bore Diameter (mm):20; Outer Diameter (mm):47; |
| 92.35.1802.991.41.1502 Standard 5 Slewing Ring Bearings | Bc:30 mm; Separable:No; Weight / LBS:0.116; Enclosure:Not Applicable; Category:Needle Non Thrust Ro; Thrust Bearing:No; Retainer:Yes; Basic dynamic load rating (C):36,4 kN; Outer Diameter (mm):32; Bore:0.866 Inch | 22 Mill; Outside Diameter:1.26 Inch | 32 Milli; Weight:0,0525 Kg; Width:1.181 Inch | |
| 91.40.2003.990.11.1502 Standard 5 Slewing Ring Bearings | Bore Diameter (mm):560; Bearing number:60/560-M; Size (mm):560x820x115; r2 min.:6 mm; C:115 mm; Weight:208 Kg; Outer Diameter (mm):820; d:560 mm; Width (mm):115; B:115 mm; D:820 mm; Basic static load rating (C0):1263 kN; r1 min.:6 mm; Basic dynamic load rating (C):615 kN; |
| 11.30.2031.600.11.1503 Standard 5 Slewing Ring Bearings | Basic dynamic load rating (C):133 kN; Size (mm):105x190x36; C:36 mm; B:36 mm; Weight:3,7 Kg; D:190 mm; (Grease) Lubrication Speed:3400 r/min; Bore Diameter (mm):105; Outer Diameter (mm):190; Width (mm):36; Basic static load rating (C0):104 kN; Bearing number:6221; d:105 mm; |
| 12.35.1960.400.11.1503 Standard 5 Slewing Ring Bearings | Weight:0,335 Kg; (Grease) Lubrication Speed:2700 r/min; Ew:114,3 mm; Basic dynamic load rating (C):119 kN; Bearing number:WJ-647224; Bc:38,1 mm; Bore Diameter (mm):101,6; Fw:101,6 mm; Outer Diameter (mm):114,3; Basic static load rating (C0):263,33 kN; |
| 91.25.1154.991.21.1503 Standard 5 Slewing Ring Bearings | H:36,5 mm; A:45 mm; L1:30 mm; Bolt (G):M10×1,5; B:34,1 mm; H3:13 mm; S:14,3 mm; d:28,575 mm; Basic static load rating (C0):7,85 kN; Basic dynamic load rating (C):14 kN; Bearing number:UCPA206-18; Bore Diameter (mm):28,575; L:84 mm; H2:71 mm; Weight:1,2 Kg; Width (mm):34,1; J:56 mm; |
| 162.25.1180.891.21.1503 Standard 5 Slewing Ring Bearings | Bearing Type - steel-on-PTFE composite:steelonPTFE composit; Width (B):9.0000; Bore Center to Body (l7):15; Body End Flats (W):16.000; Bearing number:SI10C; Body End Dia. (d4):19.000; Thread Length (l1):20.000; Width (mm):9; Weight (g):65.00; Body Dia. (d3):16.000; Spherical Diameter (dk or Dk):16.0 |
| 61.40.1400.001.29.1504 Standard 5 Slewing Ring Bearings | Size (mm):95x145x39; a:28 mm; Bearing number:33019; Width (mm):39; D:145 mm; C:32,5 mm; B:39 mm; T:39 mm; Bore Diameter (mm):95; d:95 mm; Outer Diameter (mm):145; |
| No. | Brand | B | F | M | E | i | I | g | Z |
| 281.30.1275.013 Type 110/1400.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.25.1360.600.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.25.1077.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.25.1200.601.21.1503 | Standard 5 | 64 mm | - | - | - | - | - | - | - |
| 61.40.1400.001.29.1504 | Standard 5 | 39 mm | - | - | - | - | - | - | - |
| 231.20.1000.013 Type 21/1200.1 | Standard 5 | 12,5 mm | - | - | - | - | - | - | - |
| 11.20.1220.000.11.1504 | Standard 5 | 23.00 mm | - | - | - | - | - | - | - |
| 12.30.1381.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | 67 mm |
| 11.25.1461.001.21.1503 | Standard 5 | 49,2 mm | - | - | - | - | - | - | - |
| 191.25.2000.990.41.1502 | Standard 5 | 82 mm | - | - | - | - | - | - | - |
| 281.30.1100.013 Type 110/1300.1 | Standard 5 | 17 mm | - | - | - | - | - | - | - |
| 91.20.1146.990.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.28.1400.891.21.1503 | Standard 5 | 45 mm | - | - | - | - | - | - | - |
| 162.28.1500.890.11.1503 | Standard 5 | 2 mm | - | - | - | - | - | - | - |
| 91.30.1799.991.21.1502 | Standard 5 | 15 mm | - | - | - | - | - | - | - |
| 62.25.1077.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.20.0971.001.21.1504 | Standard 5 | 60 mm | - | - | - | - | - | - | - |
| 91.40.2003.991.41.1502 | Standard 5 | 11 mm | - | - | - | - | - | - | - |
| 61.30.1320.001.21.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.20.1360.000.11.1504 | Standard 5 | 108 mm | - | - | - | - | - | - | - |
| 61.20.0944.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.25.1800.001.41.1503 | Standard 5 | 20 mm | - | - | - | - | - | - | - |
| 281.30.1175.013 Type 110/1300.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 60.25.1155.575.11.1403 | Standard 5 | 66,67 mm | 337 mm | - | 451 mm | - | - | - | - |
| 61.25.1155.500.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.30.1440.190.11.1503 | Standard 5 | 18 mm | - | - | 85,5 mm | - | - | - | - |
| 62.25.1255.575.11.1403 | Standard 5 | 120 mm | - | - | - | - | - | - | - |
| 162.36.1800.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.30.1400.000.11.1504 | Standard 5 | - | - | - | - | - | - | - | - |
11.20.1385.000.11.1504 Standard 5 Slewing Ring Bearings Video
Slewing Bearings Rings with External Gear 011.20.1385.000 ...
Slewing Bearings Rings with External Gear 011.20.1385.000.11.1504 - provide cheap and quality Machining Services - 9127107.