| r min. | 1,1 mm |
| Basic static load rating (C0) | 20,3 kN |
| B | 19 mm |
| (Grease) Lubrication Speed | 16000 r/min |
| D | 72 mm |
| Basic dynamic load rating (C) | 32,5 kN |
| Width (mm) | 19 |
| Bore Diameter (mm) | 30 |
| d | 30 mm |
| Angle (α) | 15 ° |
| Size (mm) | 30x72x19 |
| C | 19 mm |
| Bearing number | 7306C |
| Weight | 0,33 Kg |
| Outer Diameter (mm) | 72 |
| 92.20.1006.990.11.1503 Standard 5 Slewing Ring Bearings | Basic static load rating (C0):0,35 kN; d1:49,2 mm; Width (mm):15; D:68 mm; B:15 mm; Bearing number:6008/HR11TN; Weight:0,0565 Kg; d:40 mm; C:15 mm; Size (mm):40x68x15; r1 min.:0,9 mm; Outer Diameter (mm):68; Basic dynamic load rating (C):0,52 kN; Bore Diameter (mm):40; D1:58,8 mm; |
| 162.25.1120.891.21.1503 Standard 5 Slewing Ring Bearings | Internal Clearance:C0-Medium; Rolling Element:Ball Bearing; closure type:Double Sealed; Inner Race Width:0 Inch | 0 Millimete; C:12,700 mm; Width (mm):12,700; Long Description:1-1/8" Bore; 2-; Size (mm):28.575x53.975x12.700; snap ring included:Without Snap Ring; Bore Diameter (mm):28,575; preci |
| 92.35.1802.991.41.1502 Standard 5 Slewing Ring Bearings | Bc:30 mm; Separable:No; Weight / LBS:0.116; Enclosure:Not Applicable; Category:Needle Non Thrust Ro; Thrust Bearing:No; Retainer:Yes; Basic dynamic load rating (C):36,4 kN; Outer Diameter (mm):32; Bore:0.866 Inch | 22 Mill; Outside Diameter:1.26 Inch | 32 Milli; Weight:0,0525 Kg; Width:1.181 Inch | |
| 191.20.1600.990.41.1502 Standard 5 Slewing Ring Bearings | Outer Diameter (mm):110; Size (mm):75x110x11; T:11 mm; Ea:81 mm; Basic static load rating (C0):453 kN; Bearing number:K.81215LPB; Bore Diameter (mm):75; Basic dynamic load rating (C):143 kN; Weight:0,197 Kg; D:110 mm; Width (mm):11; d:75 mm; Eb:104 mm; |
| 91.25.1502.990.11.1503 Standard 5 Slewing Ring Bearings | Dynamic Load Rating (Cr):12,589; Weight (g):142.00; Mis-alignment Angle (a deg.):5; Bearing number:GEWZ25ES-2RS; Bearing Type:sealed; Static Load Rating (Cor):37,316; Max. shaft corner radius, or 45 deg. chamfer (ch1):0.012; Bore Diameter (mm):25,4; Bore Dia (d):1.0000; Max. housing corner radius, o |
| 11.30.2031.600.11.1503 Standard 5 Slewing Ring Bearings | Basic dynamic load rating (C):133 kN; Size (mm):105x190x36; C:36 mm; B:36 mm; Weight:3,7 Kg; D:190 mm; (Grease) Lubrication Speed:3400 r/min; Bore Diameter (mm):105; Outer Diameter (mm):190; Width (mm):36; Basic static load rating (C0):104 kN; Bearing number:6221; d:105 mm; |
| 61.25.1455.500.11.1503 Standard 5 Slewing Ring Bearings | C0r:5100 lbf / Static lo; C:19,05 mm; Fw:11/16 inch; D:0,938 inch; Manufacturer Name:SCHAEFFLER GROUP; nG:16000 1/min / Limiti; C:0,75 inch; Cr:3550 lbf / Dynamic l; C0r:22700 N / Static loa; Size (mm):17.462x23.812x19.05; Width (mm):19,05; m:0,045 lbs / Weight; Bearing number:BCH1112; Fw:17,462 mm; |
| 92.30.1415.990.11.1502 Standard 5 Slewing Ring Bearings | Weight (g):2,000.00; Standard Clearance:C0; Outer Diameter (mm):150; Size (mm):85x150x28; Width (B):28.0000; Dynamic Load Rating (Cr):164,000; Bearing number:NU217 E; Max. Shaft Shoulder Dia. Inner (Li):100.5; Static Load Rating (Cor):194,000; Precision:RBEC 1; Width (mm):28; Max Speed (Grease) (X10 |
| 91.35.2012.991.41.1502 Standard 5 Slewing Ring Bearings | Weight:0,185 Kg; Bore Diameter (mm):50,8; Bearing number:B-3224; Fw:50,8 mm; C:38,1 mm; Width (mm):38,1; D:60,325 mm; Outer Diameter (mm):60,325; Size (mm):50.8x60.325x38.1; Basic dynamic load rating (C):82 kN; |
| 92.40.2003.991.41.1502 Standard 5 Slewing Ring Bearings | Width (mm):84; Outer Diameter (mm):260; Angle (α):25 °; d:170 mm; Size (mm):170x260x84; Bore Diameter (mm):170; D:260 mm; Bearing number:7034 ADT; B1:84 mm; |
| 92.30.1607.991.21.1502 Standard 5 Slewing Ring Bearings | Outer Diameter (mm):52; Width (mm):24; Basic static load rating (C0):61,5 kN; Bore Diameter (mm):42; D:52 mm; Fw:42 mm; C:24 mm; (Grease) Lubrication Speed:4300 r/min; Size (mm):42x52x24; Weight:0,0862 Kg; Bearing number:HK425224; Basic dynamic load rating (C):34,2 kN; |
| 162.28.1400.891.21.1503 Standard 5 Slewing Ring Bearings | Width (mm):45; Bore Diameter (mm):110; Bearing number:NN 3022; Basic dynamic load rating (C):229 kN; (Grease) Lubrication Speed:3 400 r/min; Size (mm):110x155x45; Weight:3,71 Kg; Basic static load rating (C0):375 kN; C:45 mm; Ew:155 mm; D:170 mm; B:45 mm; r min.:2 mm; d:110 mm; Outer Diameter (mm):1 |
| 60.20.1094.500.01.1503 Standard 5 Slewing Ring Bearings | Basic static load rating (C0):16,95 kN; Bore Diameter (mm):28,575; Width (mm):12,7; C:12,7 mm; Y:1,02 mm; Fw:28,575 mm; Size (mm):28.575x34.925x12.7; D:34,925 mm; (Grease) Lubrication Speed:7400 r/min; Outer Diameter (mm):34,925; Basic dynamic load rating (C):11,65 kN; Bearing number:MJ-1881; Weight |
| 192.20.1600.990.41.1502 Standard 5 Slewing Ring Bearings | Size (mm):6x10x3; Weight:0,0007 Kg; D1:11,2 mm; C1:0,6 mm; D2:11,2 mm; ba min.:6,8 mm; B:3 mm; Width (mm):3; r min.:0,1 mm; Basic dynamic load rating (C):0,5 kN; C2:0,6 mm; d:6 mm; Outer Diameter (mm):10; D:10 mm; C:3 mm; Bore Diameter (mm):6; (Grease) Lubrication Speed:53000 r/min; r1 min.:0,08 mm; |
| 12.20.1360.000.11.1504 Standard 5 Slewing Ring Bearings | Bearing number:NJ2244 E; (Grease) Lubrication Speed:1200 r/min; d:220 mm; Outer Diameter (mm):400; Basic dynamic load rating (C):1130 kN; Weight:62,5 Kg; Width (mm):108; D:400 mm; Basic static load rating (C0):1810 kN; Fw:259 mm; B:108 mm; Bore Diameter (mm):220; Size (mm):220x400x108; C:108 mm; |
| 61.25.1250.101.21.1504 Standard 5 Slewing Ring Bearings | Size (mm):140x90x24; Mass bearing:1.11 kg; Fatigue load limit - Pu:1.2 kN; ra - max.:1.5 mm; Calculation factor - X2:0.67; Width (mm):24; Ball - Dw:11.112 mm; Calculation factor f2C:1.06; Basic dynamic load rating C:33.8 kN; Calculation factor (back-to-back, face-to-face) X2:0.67; Limiting speed for |
| No. | Brand | B | F | M | E | i | I | g | Z |
| 62.25.1077.891.21.1503 | Standard 5 | 7 mm | - | - | - | - | - | - | - |
| 61.40.1600.009.29.1503 | Standard 5 | 60,3 mm | - | - | - | - | - | - | - |
| 12.30.1995.000.11.1503 | Standard 5 | 28 mm | - | - | - | - | - | - | - |
| 11.25.1800.001.41.1503 | Standard 5 | 20 mm | - | - | - | - | - | - | - |
| 12.30.1381.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | 67 mm |
| 61.30.1320.001.21.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 60.20.0944.575.01.1403 | Standard 5 | 160 mm | - | - | - | - | - | - | - |
| 161.25.1250.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.36.1900.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.25.0980.107.11.1504 | Standard 5 | 93 mm | - | - | - | - | - | - | - |
| 162.36.1800.891.41.1503 | Standard 5 | 35 mm | - | - | - | - | - | - | - |
| 91.35.1802.990.11.1502 | Standard 5 | 5 mm | - | - | - | - | - | - | - |
| 92.25.1310.990.11.1503 | Standard 5 | 23,698 mm | - | - | - | - | - | - | - |
| 162.36.1700.891.41.1503 | Standard 5 | 30 mm | - | - | - | - | - | - | - |
| 62.30.1400.000.11.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 92.35.1802.991.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.25.0980.891.21.1503 | Standard 5 | 70 mm | - | - | - | - | - | - | - |
| 161.25.1120.890.11.1503 | Standard 5 | 49,2 mm | - | - | - | - | - | - | - |
| 191.20.2000.990.41.1502 | Standard 5 | 35 mm | - | - | - | - | - | - | - |
| 162.40.2000.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 91.30.1415.991.21.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 281.30.1475.013 Type 110/1600.1 | Standard 5 | 56 mm | - | - | - | - | - | - | - |
| 232.20.0900.503 Type 21/1050.2 | Standard 5 | 31 mm | - | - | - | - | - | - | - |
| 61.25.1120.001.21.1504 | Standard 5 | 36.068 mm | - | - | - | - | - | - | - |
281.30.1375.013 Type 110/1500.1 Standard 5 Slewing Ring Bearings Video
Buy 281.30.1375.013 Type 110/1500.1 Rothe erde slewing
Buy 281.30.1375.013 Type 110/1500.1 Rothe erde slewing ring from CRANE SLEW RING PUBLIC BONDS & PROJECTS，Cross Roller Slew Bearing
China Outer Geared Slewing Ring Bearing with Single Row
281.30.1375.013 Typ 110/1500.1, 1355, 234, 1498, 1207. 281.30.1475.013 Typ 110/ ... Single row ball slewing bearing has three different types: Single row ball
281.30.1375.013 Type 110/1500.1 Rothe Erde Slewing Ring
We supply 281.30.1375.013 Type 110/1500.1 slewing ring to customer according to Rothe Erde standard and specification, the quality of our product is same as
rodamiento precision dentado exterior serie kd 210 tipo 110/1500.1
There are a great deal of types depending on different aspects such as loads, ... RODAMIENTO PRECISION DENTADO EXTERIOR SERIE KD 210 TIPO 110/1500.1 DIAMETRO EXTERIOR 1498 MM REF. ROTHE ERDE 281.30.1375.013
281.30.1375.013 Typ 110/1500.1 bearing, Slewing ring
high quantities 281.30.1375.013 Typ 110/1500.1 Bearing dimension: 1207x1498x90, Enquiry for global 281.30.1375.013 Typ 110/1500.1 Slewing ring bearings ... Light load slewing bearings (No gear type) for Papua New Guinea 1207
China Slewing Ring Bearings for Steel Mills (281.30.1200.013
281.30.1375.013 (Type 110/1500.1) 281.30.1475.013 (Type 110/1600.1) Bearing with internal gear 232.20.0400.503 (Type 21/520.2) 232.20.0500.503 (Type
Buy 281.30.1375.013 Type 110/1500.1 Rothe erde slewing ring
Buy 281.30.1375.013 Type 110/1500.1 Rothe erde slewing ring from Turbine Bearing Supplier，Thyssenkrupp Rothe Rrde Slewing Bearing Distributor online
Buy 281.30.1375.013 Type 110/1500.1 slewing rings without gear
Buy 281.30.1375.013 Type 110/1500.1 slewing rings without gear from EF SLEWING BEARING CO., LTD.，thyssenkrupp rothe erde slewing bearing Distributor